Rubber pipes immuG

immuG is a leader in the development and production of abrasion-resistant technology. It focuses on supplying high-quality products such as abrasion-resistant hoses, pipes, pump reducers, elbows and other specialty fittings. These products are designed to withstand the most demanding operating conditions and extend the life of equipment in industrial applications.

immuG is a sought-after partner in the mining, energy and chemical industries. All products can be customized to meet specific customer requirements.
INDUSERV 24 is the exclusive representative of immuG for the Czech Republic and Slovakia.

Main product lines include:

  • Pipes and hoses for transporting abrasive materials – resistance to mechanical wear and chemical corrosion, long service life and high reliability.

  • Reducing compensators for pumps – decreasing mechanical stress, minimizing vibrations, protecting equipment, flexibility and resistance to extreme conditions.

  • Fittings and components for pumps and mixers – optimization of medium flow, custom-made, wear resistance, compatible in various devices.

The main advantages of using GUR rubber pipes and parts:

  • Homogeneous material (not rubberized or squeegee) – no cracking, peeling or subsequent clogging and damage to the technology by chipped particles or rubber fragments.

  • All leading edges are made of the same solid material, there are no problems with abrasion on the edges of the pipe and subsequent damage

  • The thickness of the arch wall is around 24 mm!!!

  • Does not crack during impacts, in connecting fittings or when exposed to temperature changes

  • Minimal expansion of rubber pipes when the temperature changes

  • Assembly, disassembly using a flange system with rotating flanges

  • Reduction of noise and vibrations

  • Pipes wirth GUR bends are very flexible – there is no cracking of the pipes or pressure on the pump necks or tanks

T-shaped rubber pipe, custom-made.

Asymmetric and symmetrical reducing compensators for pump suction and discharge.

Flexible rubber arch with rotating flanges.

Spare parts

INDUSERV 24 has been operating on the market for many years and during this time we have encountered a number of specific technical requirements and operational problems with a wide variety of technological installations. Based on this experience, we offer a wide range of spare parts for technological equipment, such as pumps, crushers, hydrocyclones, mills, and other industrial components.

We supply parts in standard designs as well as in special material and structural modifications according to the customer’s specific operational requirements. At the same time, we are always ready to look for new technical solutions.

If you cannot find a specific spare part here, do not hesitate to contact us – we will be happy to suggest a suitable individual solution.

SPARE PARTS FOR LINATEX LINAPUMP IIIr PUMPS

We supply high-quality, non-original spare parts that are fully compatible and reliable. We provide our customers with a full-fledged alternative to original parts, but at significantly more favorable price conditions.

All spare parts have undergone long-term testing directly at our customers’ facilities, which has confirmed their long service life and reliability.

  • Impellers

  • Suction and discharge side linings

  • Mechanical seals

  • Shafts

  • Suction liners

  • Bearing cartridges

SIZES OF SPARE PARTS FOR LINATEX LINAPUMP IIIr PUMPS:

  • 35 x 35

  • 50 x 50

  • 100 x 100

  • 150 x 125

  • 200 x 150

  • 250 x 200

We will be happy to provide you with detailed information and technical support when selecting spare parts. Do not hesitate to contact us at any time for a specific offer or consultation.

SPARE PARTS FOR LINATEX LINAPUMP IIIr PUMPS

SUCTION LINER FOR LINAPUMP PUMP

LINING DISCHARGE SIDE

SUCTION NOZZLE FOR LINAPUMP 200×150

IMPELLER FOR LINATEX LINAPUMP IIIr 250/200 PUMP

Abrasion-resistant rubber in rolls, width 1400 MM

Waterjet cutting in various shapes and thickness

Abrachutz – abrasion-resistant natural rubber

Premium natural rubber with a hardness of 38° shore is suitable for environments with extreme abrasion due to its high elasticity and wear resistance.

Property Value Testing method
Hardness 38 ± 5 Sh A DIN 53505
Specific weight 0,98 t/m³ DIN 53508
Tensile strength (min.) 240 kg/cm² DIN 53504
Elongation (min.) 810 % DIN 53504
Abrasion resistance (max.) 80 mm³ DIN 53516
Temperature range from -40 °C to +70 °C
Color red
Thicknesses available 1 – 40 mm
Packaging in rolls or cut to individual specifications

Spare parts for Warman pumps

We supply high-quality non-original spare parts for Warman pumps, types GSL, AH, SP, SPR, Envirotech and TUL.

For example for:

  • AH 2/1,5; 3/2; 4/3; 6/4; 8/6; 10/8; 12/10; 14/12; 16/4
  • 100 PD-PC; 2-1,5 BAH; 100 PE-PCH; 150 PE-PC; 150 PF-PCH
  • 150 TV-SPR; 200 PF-PCH
  • 700 TY-GSL; 800 TY-GSL
  • 550-TUL

Guaranteed short delivery times – for selected parts within 10 days of ordering.

Housing for Warman AH 6-4 pump

Ceramic impeller for Warman 550-tul pump

WARMAN CS15-10 HYDROCYCLON CONICAL LINER

EXPELLER CHAMBER FOR WARMAN AH 4/3 PUMP

IMPELLER FOR WARMAN AH 6/4 PUMP

EXPELLER FOR WARMAN AH 4/3 PUMP